Introduction
If you are a PlayStation 4 owner, you might have encountered the issue of the Dualshock 4 controller flashing yellow. This problem can be quite frustrating, especially if you are in the middle of an intense gaming session. In this article, we will discuss what the flashing yellow light means and how you can fix it.
What does the flashing yellow light mean?
The Dualshock 4 controller has a light bar on the back that indicates the controller’s status. If the light bar is flashing yellow, it means that the controller is low on battery and needs to be charged. However, if the controller continues to flash yellow even after being charged, it could indicate a different problem.
How to fix the flashing yellow light?
There are several solutions to fix the Dualshock 4 controller’s flashing yellow light. Let’s take a look at each of them.
1. Charge the controller
The first and most obvious solution is to charge the controller. Connect the controller to your PlayStation 4 using the USB cable that came with it. The yellow light will stop flashing once the controller is fully charged. If the light continues to flash even after charging, move on to the next solution.
2. Reset the controller
Sometimes, the controller may need to be reset to fix the flashing yellow light issue. To do this, you need to locate the reset button on the back of the controller. It is a small hole located next to the L2 button. Use a paperclip or a similar object to press the reset button for a few seconds. The yellow light should stop flashing, and the controller should work normally.
3. Replace the battery
If the controller’s battery is old or damaged, it may not hold a charge and cause the yellow light to flash. In this case, you need to replace the battery. You can buy a replacement battery online or from a local electronics store. Follow the instructions provided with the battery to replace it.
4. Check the USB cable
If the USB cable you are using to charge the controller is damaged or not working correctly, it may not charge the controller correctly, causing the yellow light to flash. Try using a different USB cable to charge the controller and see if it fixes the issue.
5. Contact customer support
If none of the above solutions work, it may be a hardware issue with the controller. In this case, you should contact PlayStation customer support for assistance.
Conclusion
The Dualshock 4 controller flashing yellow can be a frustrating issue, but it can be fixed with the solutions mentioned above. Always make sure to charge the controller properly and use a working USB cable. If the problem persists, try resetting the controller or replacing the battery. If none of these solutions work, contact customer support for assistance.