Irobot Error 43: What It Is And How To Fix It

Introduction

If you own an iRobot vacuum cleaner, you may have encountered an error code 43 at some point. This error code indicates a problem with your device and can prevent your vacuum from working properly. In this article, we will discuss what iRobot error 43 is, what causes it, and how you can fix it.

What is iRobot Error 43?

iRobot error 43 is a common error code that occurs on iRobot vacuum cleaners. This error code indicates that there is a problem with the communication between the iRobot vacuum and the charging dock. When you see this error code, your vacuum may not work properly, and it may not be able to charge itself correctly.

What Causes iRobot Error 43?

There are several reasons why you may be experiencing iRobot error 43. One of the most common reasons is a dirty charging contact. If the charging contacts on your vacuum or charging dock are dirty, your vacuum may not be able to communicate with the dock correctly, resulting in the error code.

Another common cause of iRobot error 43 is a faulty battery. If your vacuum’s battery is old or damaged, it may not be able to hold a charge or communicate with the charging dock correctly, resulting in the error code.

How to Fix iRobot Error 43

If you are experiencing iRobot error 43, there are several steps you can take to fix the problem. Here are some of the most effective solutions:

Clean the Charging Contacts

The first step you should take is to clean the charging contacts on your vacuum and charging dock. To do this, use a soft, dry cloth to wipe the contacts clean. Make sure that there is no dirt or debris on the contacts that could be preventing your vacuum from communicating with the dock correctly.

Replace the Battery

If cleaning the charging contacts does not fix the problem, you may need to replace the battery in your iRobot vacuum. You can purchase replacement batteries online or from your local electronics store. Follow the manufacturer’s instructions to install the new battery, and then try charging your vacuum again.

Reset Your Vacuum

If neither of the above solutions works, you may need to reset your iRobot vacuum. To do this, unplug the charging dock from the wall and remove the battery from your vacuum. Wait for at least 30 seconds, and then reinsert the battery and plug the dock back in. This should reset your vacuum and clear the error code.

Tips to Prevent iRobot Error 43

While iRobot error 43 can be frustrating, there are steps you can take to prevent it from happening in the first place. Here are some tips to keep your iRobot vacuum working properly:

Clean the Charging Contacts Regularly

To prevent iRobot error 43, make sure to clean the charging contacts on your vacuum and charging dock regularly. Use a soft, dry cloth to wipe away any dirt or debris that may be preventing your vacuum from communicating with the dock correctly.

Replace Your Vacuum’s Battery Regularly

If your vacuum’s battery is old or damaged, it may not be able to hold a charge or communicate with the charging dock correctly, resulting in iRobot error 43. To prevent this from happening, make sure to replace your vacuum’s battery regularly. Follow the manufacturer’s instructions to install the new battery correctly.

Avoid Using Non-Standard Chargers

Using non-standard chargers can also cause iRobot error 43. To prevent this from happening, only use the charger that came with your iRobot vacuum. Using a different charger can damage your vacuum’s battery and cause the error code to appear.

Conclusion

iRobot error 43 can be frustrating, but it is a common issue that can be fixed. By cleaning the charging contacts, replacing the battery, or resetting your vacuum, you can get your device back up and running in no time. To prevent iRobot error 43 from happening in the future, make sure to clean the charging contacts regularly, replace your vacuum’s battery when needed, and only use the charger that came with your device.