Roomba Err 5: How To Troubleshoot And Fix

Introduction

If you’re a proud owner of a Roomba robotic vacuum cleaner, you know how much convenience it brings to your daily cleaning routine. However, like any other electronic device, it may encounter errors from time to time. One of the most common issues that Roomba owners face is the “Err 5” error. In this article, we’ll explore what causes this error and how to fix it.

What is Roomba Err 5?

Roomba Err 5 is a common error that occurs when the robot vacuum cleaner encounters an obstacle or obstruction during cleaning. This error is usually accompanied by a beeping sound and a flashing red light on the device.

Causes of Roomba Err 5

There are several reasons why Roomba may encounter Err 5 error, including:

• Foreign objects such as toys, cables, or shoes obstructing the Roomba’s path.
• Dirty or clogged brushes, wheels, or sensors that prevent Roomba from moving freely.
• Defective or worn-out parts such as the battery, motor, or sensors.

How to Troubleshoot Roomba Err 5

Before you panic and call for professional help, try these simple troubleshooting steps:

Step 1: Clear Obstructions

Check your Roomba’s path for any foreign objects that may be blocking its movement. Remove any toys, cables, or shoes that are in the way.

Step 2: Clean Roomba’s Parts

Dirty or clogged brushes, wheels, or sensors can prevent Roomba from moving freely. Clean these parts with a brush or cloth to remove any dirt or debris.

Step 3: Restart Roomba

Restarting your Roomba may help clear any internal error that caused Err 5. Press and hold the “Clean” button for 10 seconds until you hear a beep sound, then release the button.

How to Fix Roomba Err 5

If the above troubleshooting steps didn’t work, you may need to fix or replace some of Roomba’s parts.

Step 1: Check Battery

The battery is one of the most common causes of Roomba Err 5. Check if your Roomba’s battery is fully charged and working properly. If not, replace it with a new one.

Step 2: Check Motor

If Roomba’s motor is worn-out or defective, it may cause Err 5. Check if the motor is working properly by turning the device over and spinning the brushes. If the motor doesn’t spin, you may need to replace it.

Step 3: Check Sensors

The sensors are responsible for detecting obstacles and guiding Roomba’s movement. If the sensors are dirty or defective, they may cause Err 5. Clean the sensors with a soft cloth or replace them if necessary.

Conclusion

Roomba Err 5 is a common error that can be easily fixed with some simple troubleshooting steps. By clearing obstructions, cleaning Roomba’s parts, and checking its battery, motor, and sensors, you can get your robotic vacuum cleaner back to its cleaning duties in no time.