Samsung I9300 Lollipop Firmware Download: Everything You Need To Know

Introduction

The Samsung i9300, also known as the Galaxy S III, was a flagship device released in 2012. If you still have this phone and want to upgrade to a newer version of Android, you might be wondering how to download and install the Lollipop firmware. In this article, we’ll guide you through the process step by step.

What Is Lollipop Firmware?

Lollipop is the code name for Android 5.0, which was released in 2014. This version of Android brought a lot of new features and improvements, such as a new material design language, improved battery life, and better notification management. Samsung released the Lollipop firmware update for the i9300 in 2015, so if you haven’t updated your phone since then, it’s time to do so.

How To Check Your Current Firmware Version

Before you start the download and installation process, you need to check which firmware version your phone is currently running. To do this, go to Settings > About device > Software info. Look for the “Android version” and “Baseband version” sections. If your Android version is 4.3 or lower, you need to update to KitKat first before you can update to Lollipop. If your Android version is 4.4 or higher, you can proceed to the next step.

Where To Download The Lollipop Firmware

There are many websites online that claim to offer firmware downloads for Samsung devices, but not all of them are trustworthy. To avoid downloading a fake or malware-infected file, we recommend using the official Samsung website. You can go to the Samsung firmware download page, enter your phone model number (i9300), select your country and carrier, and download the firmware file.

How To Install The Lollipop Firmware

Once you’ve downloaded the firmware file, you need to install it on your phone. Here’s how: 1. Make sure your phone is fully charged and has enough storage space for the firmware file. 2. Download and install the Samsung USB drivers on your computer. 3. Download and install the Odin flashing tool on your computer. 4. Boot your phone into download mode by pressing and holding the Volume Down, Home, and Power buttons together. 5. Connect your phone to your computer using a USB cable. 6. Open the Odin flashing tool and select the firmware file you downloaded earlier. 7. Click the Start button to begin the flashing process. 8. Wait for the process to complete, which may take a few minutes. 9. Your phone will automatically reboot once the process is finished.

Tips And Precautions

Here are some tips and precautions to keep in mind when downloading and installing the Lollipop firmware on your Samsung i9300: – Make sure you download the correct firmware file for your phone model, country, and carrier. – Backup all your important data before flashing the firmware, as the process will erase all data on your phone. – Do not disconnect your phone from your computer during the flashing process, as this may brick your phone. – If the flashing process fails, try again with a different USB cable or a different computer. – If you encounter any issues after flashing the firmware, you can try performing a factory reset or contacting Samsung customer support.

Conclusion

Upgrading to the Lollipop firmware can breathe new life into your Samsung i9300 phone, giving you access to new features and improved performance. By following the steps and tips outlined in this article, you can safely and successfully download and install the firmware on your device. If you have any questions or concerns, feel free to leave a comment below.